How to use an atta chakki machine safely
(1) The piece ought to be fastened on the cement foundation. If you alter locations typically, sheets and motors ar put in once the angle is formed of steel.
(2) After putting in the mill to accelerate the assorted parts, parallel to the motor shaft and grinder shaft, at a similar time to ascertain the tightness of the belt.
(3) Before beginning the atta chakki machine, manually check the rotor to examine if the operation is versatile and traditional, notwithstanding there’s a collision development, whether or not the direction of rotation of the rotor is correct, notwithstanding the motor and pulverizer style well. Be done Or not.
(4) Do not modification your heart if the speed is simply too high or too low.
(5) After the beginning of the Atta chakki machine ought to be softened for 2-3 minutes, no abnormal before operating.
(6) Feeding ought to be uniform, if noise, bearings and vital sign ar too high or if the tendency of the development is to be sprayed it ought to stop at once to ascertain and disturb.
(7) Carefully examine the fabric, so metal, stone associated alternative exhausting objects within the crushing chamber don’t cause an accident.
(8) To feed, the workers ought to stand by the grinder to forestall dust to forestall the face from bouncing back. once brought by hand, long smoke wasn’t found to be robust enough to forestall it.
(9) Stop before feeding, when improvement, take away the fabric when improvement, then put off the ability. Closed when improvement and maintenance. (10) when three hundred hours of operation, to scrub the bearings, oil change; with the approval of full bearing 1/3 of the put in oil, less than 1/2. within the long-term, you must take away the drive belt.
(10) After three hundred hours of operation, to scrub the bearings, oil change; with the approval of full bearing 1/3 of the put in oil, less than 1/2. within the long-term, you must take away the drive belt.